Scuff Resistance Tester – PRIMA SERIES
4.9 out of 5
Presto Scuff Resistance Tester – HMI rubs two surfaces of printed labels against each other i.e. face-to-face in the same plane, under a constant rubbing pressure. The test equipment is used to calculate color transfer from printed surface due to constant rubbing...read more
Features of Scuff Resistance Tester – PRIMA SERIES
- HMI based Touchscreen model
- Accurate rpm of rotating discs using synchronous motor
- Motorized weight arrangement in plunger
- History data involves username, time, date, counts, etc.
- Highly accurate test results under specified diameter and uniform load
- Motorized geared system for sample scuff movement
- Provision of set number of counts through HMI
- Uniform load by weights on test sample for evenness in testing
- Presettable counter up to 9999 counts inbuilt in HMI
- Firm hold of test sample by circular clamps
- Incorporated with a blower to remove unnecessary particulates during testing.
- Blower with set counts and Auto/Manual operation.
- Pass/ Fail criteria can be programmed
- Easy data management.
- USB option for storing test data.
- Program profile for selecting test parameters.
- Data output in data record format.
Technical specifications
- Upper Motor Capacity: 10kg/cm2 Torque Motor / 220VAC Single Phase Synchronous
- Lower Motor Capacity: ¼ HP / 220VAC Single Phase, 120RPM
- Safety Lock : Provided with Upper Clamp
- Input Voltage: 5Amp. 220 V AC, Single Phase, 50 Hz + Earth
- Sample Preparation Templates: 2 Nos.
- Blower Range of Counts: 9999
- Model Type: Bench Model
- Test Weight : (1+1) or 2psi
- Counter Range: 0-9999, 4 Digit, Inbuilt in HMI
- Rubbing : Anti-Directional @60rpm by both upper jaw and lower jaw
- Display : HMI , Colored Touch Screen Display
- Diameter of Lower Clamp: 120mm ± 2mm
- Diameter of Upper Clamp: 48mm ± 2mm
- Standard: ASTM F 2497-05
- Material: Mild Steel
Related Products
Tearing Strength Tester- Model No. PTT-560 Prima
RCT/FCT/Edge Crush Tester
Dart Impact Tester
Scuff Resistance Tester - NXG
Scuff Resistance Tester – PRIMA SERIES
4.9 out of 5
Presto Scuff Resistance Tester – HMI rubs two surfaces of printed labels against each other i.e. face-to-face in the same plane, under a constant rubbing pressure. The test equipment is used to calculate color transfer from printed surface due to constant rubbing. To perform the test, the sample is attached to the base of the tester with the printed side up. 2 psi test weight is placed through plunger mechanism in position over the sample so that the printed sides are face to face. The tester is pre-set for the number of strokes from the HMI touch screen.
Features of Scuff Resistance Tester – PRIMA SERIES
- HMI based Touchscreen model
- Accurate rpm of rotating discs using synchronous motor
- Motorized weight arrangement in plunger
- History data involves username, time, date, counts, etc.
- Highly accurate test results under specified diameter and uniform load
- Motorized geared system for sample scuff movement
- Provision of set number of counts through HMI
- Uniform load by weights on test sample for evenness in testing
- Presettable counter up to 9999 counts inbuilt in HMI
- Firm hold of test sample by circular clamps
- Incorporated with a blower to remove unnecessary particulates during testing.
- Blower with set counts and Auto/Manual operation.
- Pass/ Fail criteria can be programmed
- Easy data management.
- USB option for storing test data.
- Program profile for selecting test parameters.
- Data output in data record format.
Technical specifications
- Upper Motor Capacity: 10kg/cm2 Torque Motor / 220VAC Single Phase Synchronous
- Lower Motor Capacity: ¼ HP / 220VAC Single Phase, 120RPM
- Safety Lock : Provided with Upper Clamp
- Input Voltage: 5Amp. 220 V AC, Single Phase, 50 Hz + Earth
- Sample Preparation Templates: 2 Nos.
- Blower Range of Counts: 9999
- Model Type: Bench Model
- Test Weight : (1+1) or 2psi
- Counter Range: 0-9999, 4 Digit, Inbuilt in HMI
- Rubbing : Anti-Directional @60rpm by both upper jaw and lower jaw
- Display : HMI , Colored Touch Screen Display
- Diameter of Lower Clamp: 120mm ± 2mm
- Diameter of Upper Clamp: 48mm ± 2mm
- Standard: ASTM F 2497-05
- Material: Mild Steel