Salt Spray Chamber - Korrox IV Magnus Series Computerized

As a metal product manufacturer, you must be worried about the corrosion resistance of metal parts and components, right? Thus, it is important for you to test your material beforehand so that no issue will occur while making them in use. You can easily perform salt spray testing on materials by using Presto Salt Spray Chamber - Korrox IV Magnus Series Computerized. This will be a perfect lab testing equipment for metal products manufacturers that want to assure about the resistance of surface coatings against corrosion. The components will be tested in the salt-laden environment under enabled parameters.

This corrosion-resistant test chamber is easy to use and place the samples. Besides this, it has been built with unique design features and can perform salt spray tests in a fast manner. Korrox IV Magnus Series Computerized has an ergonomically pneumatically operated canopy with protection interlock and has been embedded with simply approachable salt spray atomizer in transparent toughened Plexi glass canopy that will be easy to maintain.

Besides this, you will get a large transparent acrylic viewing window for an uninterrupted visual approach to the chamber interior and test material. It has been designed strictly designed as per industrial standards that include ASTM B117, JIS Z 2371, ISO 9227, and various other test standards.  Below we have listed the features and technical specifications of this lab testing equipment.

Features of Salt Spray Chamber - Korrox IV Magnus Series Computerized

• HMI-based Touchscreen Model

• Inbuilt temperature settings

• Salt Spray Test mode enabled to set parameters according to test sample

• Corrosion Resistant PT-100 sensor

• Solid state digital Programmable Temperature Controller

• Program profile for selecting test parameters and performing the test.

• Easy Data Management. Users can create PID settings, Air Saturator settings, test temperature, test and air purge time, etc.

• Current test running status display

• Robust Construction with Fiber reinforced body(Triple wall)

• Ease of use of sample placements inside the test chamber

• Pneumatically operated canopy (only for 250 Ltr. Model)

• Air purge after the test for fog settlement.

• Reservoir Tank inside sponge filter with low solution level alarm.

• 5-point Auto Tuning feature selection

• Real-time vs temperature graph

• Data recording with a temperature data reading

• USB option available (Pen drive is not a part of supply)

• User can control PID settings through Advanced Hysteresis setting

• Angle of Canopy maintained in order to restrict the flow of droplets directly on the test sample.

• Low compressed air alarm (Smart device introduce)

• Low NACL solution alarm.

• Over / under voltage protection

• Individual specimen real-time monitoring with identification.

• Maintain fault history (Easy to Diagnostic the exact issue)

Technical specifications

• Display: HMI Based touchscreen 7" TFT LCD Color screen
• Chamber Temp Range: Ambient to 40ºC
• Test Chamber Temp. working Range: 35ºC ± 2ºC
• Chamber Temperature Least Count: 0.1ºC
• Chamber Temperature Repeatability: ± 2ºC
• Air Saturator Temperature Range: 40ºC- 49ºC
• Air Saturator Temperature Least Count: 0.1ºC
• Air Saturator Temperature Repeatability: ± 2ºC
• Power: 220V, Single phase, 50 Hz, 15A
• pH value of Salt Solution: 6.5 to 7.2 pH
• Temperature Control: Inbuilt PID Temperature Controller
• Timer(Hour meter): 6 digits
• Test Air Pressure: 0.7Kg/cm² - 1.2Kg/cm²
• Air Regulator: 0 to 30 psi

*Compressed Air requirement: Approx. 7 cfm (Air Compressor not part of supply) Main airline pressure regulator with filter in customer scope.